Filter
Top Products
68
Others
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptoms and some solutions.
Symptoms Solutions
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
DVD/VCR does not operate.
DVD/VCR
Page
5
–
5
33,45
The remote control does not function.
• Make sure the DVD/VCR•TV•CABLE BOX mode is set properly.
• Aim the remote control at the remote sensor.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
15
DVD
No picture.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not set to the video
channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
equivalent).
• Channel is set to the external mode.
No sound.
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
16~19
25
16~22
–
–
16~22
–
34,47
• Select proper language in the menu options.Display is not shown in your language. 60
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
Stopping playback, slow-motion play, repeat
play, or memory play, etc. cannot be
performed.
• Some discs may not do some of the functions.
45
8
10
–
No Cable TV reception.
• Check all Cable TV connections.
• Station or Cable TV system problems, try another station.
18~19
Noise bars on screen.
•Tracking adjustment beyond range of automatic tracking circuit. Try Manual
tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
VCR
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
TV recording does not work. 32,37
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER REC has not been pressed (
is not lit).
27
40
40
34
34
–
No picture, or the screen is blurred or divided
into two parts.
• The PROGRESSIVE scan is “On” although the unit is connected to a TV via the
VIDEO OUT or the S-VIDEO OUT jack.
63
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
appears on the screen.
54
52
47
No 4:3 (16:9) picture. • The setup does not match your TV.
No on-screen display. • Select Display “On”.
60
60
No surround sound. • The setup does not match your stereo system.
The unit or remote operation key is not
functioning.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
23,24
Playback does not start when the title is
selected.
• Check the Parental setup.
Audio soundtrack and/or subtitle language
is not changed when you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
–
62,64
53,54
2F90201A (E)p64-69 4/4/05, 9:04 PM68