Filter
Top Products
22
Installation and
connection
CONTENTS
Notes
• The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
• When connecting to a Macintosh computer, use the supplied Mac adapter (Multiple Scan 21 compatible). For some models the adapter is not required.
• You may not be able to connect some computers to the projector. For details, consult the dealer.
• Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,
resolutions, etc.
Connecting a computer
You can project the picture from the computer.
Check that the power for the projector and computer is off before connecting the cables.
USB MONITOR OUT
COMPUTER IN 1
(
Y/P
B
/P
R
)
COMPUTER IN 2
CONTROL
S-VIDEOVIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN
AUDIO
OUT
USB MONITOR OUT
COMPUTER IN 1
(
Y/P
B/PR
)
COMPUTER IN 2CONTROL
S-VIDEOVIDEO
VIDEO IN
R - AUDIO - L
AUDIO
IN
AUDIO
OUT
COMPUTER IN 1 Connector
For use as both analog RGB1 input and Y/P
B/PR input. At shipping from
factory, it is set for use as analog RGB1 input.
AUDIO IN jack
For use as both audio signals for RGB input (analog RGB1/analog
RGB2/digital RGB) and Y/P
B/PR input.
ø3.5mm Stereo mini-jack
To audio output port
RGB cable (supplied)
To AUDIO IN jack
Computer
To COMPUTER IN 1 connector
Be sure to connect in the proper
direction.
To monitor port ( )
Audio cable (supplied)
Connecting a Mac adapter for
Macintosh computers (supplied)