Filter
Top Products
68
CONTENTS
Adjustments &
Settings
LASER
4-a
4-a
4-a
4-a
4-a
4-a
4-a
4-a
MENU
ON/STANDBYINPUT
L-CLICK R-CLICK
ENTER
KEYSTONE
AUTO
SET
EXIT
PIP
FREEZE
MUTECALL
RESIZE
VOLUME/ADJUST
TEMP LAMP ON
BUSY FAN
KEYSTONE
SET
AUTOAUTO
EXIT
ENTER
MENU
INPUT
VOL/ADJ.
TEMP
LAMPON
BUSY
FAN
ON/STANDBY
KEYSTONE
SET
AUTOAUTO
EXIT
ENTER
MENU
INPUT
VOL/ADJ.
ON/STANDBY
Digital RGB
Default setting
COMPUTER-1
COMPUTER-2
Video
Memory card
Camera
S-video
Analog RGB
(
1
)
Y/P
B
/P
R
Analog RGB
(
2
)
Digital RGB
Input source setting
MENU EXIT
Change Back
ENTER
Set
QUICK
Item
When selecting “Input source setting” in step 3. (Set the input that can be selected using
INPUT button.)
Use the selection buttons ( / ) to select the
input source to be set, then press ENTER to
check it.
• The check turns on and off each time the ENTER button is
pressed.
• When a check box is checked, that input source can be
selected by the INPUT button.
(When selecting COMPUTER-1 and COMPUTER-2)
Press VOL/ADJ (+/
-
) to select the type of input
source.
The setting whose button is displayed in yellow is the one
currently set.
Press EXIT to return to the FULL MENU.
Press ENTER.
The sub-menu of “Input source setting” appears.
Notes
• It is impossible to exit from the menu if no input source is selected.
• If the check in the check box for the currently selected source is removed, the setting becomes
effective the next time the input is changed.
• For the memory card and document imaging camera, there are modes in which these can be
selected even if their check box is not checked.
56
77
Menu items Main unit indication
COMPUTER-1 COMPUTER IN 1
COMPUTER-2
COMPUTER IN 2
Video VIDEO
S-video S-VIDEO
Memory card
Camera
Document imaging camera
(For the model with camera)
ENTER
ENTER
ENTER
ENTER
EXIT
EXIT
FULL MENU settings – Default setting (continued)
Continued
4-a
Remote control
Control panel
(Main unit side)