Filter
Top Products
10
Connecting
your TV
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
Connecting a DVD player with ColorStream
®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs. You can record from one source while watching a
program from another source. Your TV is capable of using ColorStream
(component video). Connecting your TV to a component video compat-
ible DVD player, such as a Toshiba DVD player with ColorStream
®
, can
greatly enhance picture quality and performance.
DVD player with ColorStream
®
TV
Stereo VCR
From antenna
Note:
For the highest possible picture quality, use
component video cables between TV and
DVD player. You can connect the component
video cables to either set of ColorStream
jacks on the TV (HD-1 or HD-2).
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems. A
1080i signal will provide the best picture
performance.
If your DVD player does not have component
video, use the S-video and standard audio
connections instead. Do not connect both an
S-video and a standard video cable to
VIDEO1 (or VIDEO2) at the same time or the
picture performance will be unacceptable.
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
3R40121A/E P07-15 6/7/04, 18:5610