Toshiba 32AF44 CRT Television User Manual


 
19
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix Index
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
To select an on-screen display language:
1. Press MENU, and then press x or until the SET UP menu
appears.
2. Press y or z to highlight LANGUAGE.
3. Press x or to highlight your desired language.
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
Programming channels into the channel
memory
When you press CHANNEL y or z on the remote control or
TV front panel, your TV will stop only on the channels stored in the
channel memory. Follow the steps below and on the next page to
program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the channel memory. After the channels are stored
automatically, you can manually add or erase individual channels
To program channels automatically:
1. Press MENU, and then press x or until the SET UP menu
appears.
2. Press y or z until TV/CABLE is highlighted.
3. Press x or to highlight either TV (if you use an antenna) or
CABLE (if you have cable service).
4. Press z to highlight CH PROGRAM.
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
5. Press x or to start channel programming. The TV will
automatically cycle through all the TV or CABLE channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
“CH PROGRAM” appears.
6. When channel programming is complete, the message
“CH PROGRAMMING COMPLETED” appears.
7. Press CHANNEL y or z to view the programmed channels.
(Continued on next page)
MENU
yzx
CHANNEL yz
MENU
x •zy
DEMO MENU TV/VIDEO VOLUME CHANNEL
Channel zy
TV front panel