Filter
Top Products
29
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix Index
If you forget your PIN code:
While the PIN code entering screen
is displayed, press RECALL four
times within 5 seconds. The PIN
code you stored will be released
(returned to BLOCKING RESET
status).
SELECT [0–9] END [EXIT]
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
_ _ _ _
SET UP
SELECT [0–9] END [EXIT]
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
_ _ _ _
SET UP
Using the V-CHIP (parental control) feature
The V-CHIP CONTROL menu includes the ENABLE
BLOCKING, SET RATING, SET BLOCKING OPTIONS, NEW
PIN CODE, BLOCK CHANNEL, VIDEO LOCK, and GAME
TIMER functions. You can use these functions after entering the
correct PIN code.
Entering the PIN code
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight V-CHIP CONTROL, and then
press •.
MOVE
[
]
[
]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
SET UP
START
The PIN code entering screen (BLOCKING RESET or
BLOCKING ACTIVE) appears, as follows:
• BLOCKING RESET status:
Press the Channel Number buttons
(0–9) to store a new 4-digit PIN
code.
• BLOCKING ACTIVE status (when
the PIN code is already stored):
Press the Channel Number buttons
(0–9) to enter the 4-digit PIN code
you previously stored.
If the wrong PIN code is entered,
the message “Incorrect” will appear.
Enter the code again.
3. When the PIN code is entered, the V-CHIP CONTROL menu
(illustrated below) opens.
MOVE
[
]
[
]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
SET UP
SELECT
Continue to set each V-CHIP CONTROL item as described on
pages 30–35.
Note:
The V-Chip feature is only available for the
U.S. V-Chip system. The Canadian V-Chip
system (“Puce-V”) is not supported.
RECALL
MENU
yzx •
Channel
Numbers