Filter
Top Products
33
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix Index
Using the BLOCK CHANNEL feature (V-Chip control)
With the BLOCK CHANNEL feature, you can block specific
channels. You will not be able to tune blocked channels until you
clear the setting.
You can block a maximum of four channels.
If you try to tune a blocked channel, the nearest unblocked channel
will appear.
Note: The BLOCK CHANNEL feature is not affected by the
ENABLE BLOCKING setting (as described under “MPAA rating blocking”
on page 30).
To block a channel:
1. Tune the TV to the channel you want to block.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight V-CHIP CONTROL, and then
press •. The PIN code entering screen opens.
MOVE
[
]
[
]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
SET UP
START
SELECT [0–9] END [EXIT]
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
_ _ _ _
SET UP
4. Press the Channel Numbers (0–9) to enter your 4-digit PIN code
(see page 29). The V-CHIP CONTROL menu opens.
5. Press y or z to highlight BLOCK CHANNEL, and
then press • to open the BLOCK CHANNEL menu.
6. Press x or • to highlight SET, and then press z. The blocked
channel number appears in the list.
MOVE
[
]
[
]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
SET UP
SELECT
SELECT
[
] [
]
BLOCK CHANNEL
[SET]
CLEAR
000
6
SET UP
SET
END [EXIT]
7. Press EXIT.
8. Repeat steps 1–7 for other channels you want to block.
To unblock a channel:
Follow steps 1–8 above, but select CLEAR in step 6.
MOVE
[
]
[
]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
SET UP
SELECT
SELECT
[
] [
]
BLOCK CHANNEL
SET [CLEAR]
0 0 0
0
SET UP
SET
END [EXIT]
Channel
Numbers
MENU
yzx •