Toshiba 32HLC56 Flat Panel Television User Manual


 
15
HLC56 (E/F) Web 213:276
Chapter 2: Connecting your Monitor
Connecting a personal computer
(PC)
This connection allows you to view the image from a PC on the
monitor’s screen. When connecting a PC to the monitor, use an
analog RGB (15-pin) computer cable and a PC audio cable.
To use a PC, set the monitor output resolution on the PC
before connecting it to the monitor. The following signals
can be displayed:
VGA: 640 5 480 @ 60Hz
SVGA: 800 5 600 @ 60Hz
XGA: 1024 5 768 @ 60Hz
SXGA: 1280 5 1024 @ 60Hz
Other formats or non-standard signals will not be displayed
correctly.
To display the optimum picture, use the PC setting feature
(
- “Using the PC setting feature” on page 37).
Note:
Some PC models cannot be connected to this monitor.
An adapter is not needed for computers with a DOS/V
compatible mini D-sub15-pin terminal.
Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
Never connect a PC to the HDMI port.
Conversion adapter
(if necessary)
PC audio
cable
PC audio
output
Computer
Monitor's upper back panel Monitor's lower back panel
1115
610
15
Pin assignment for RGB/PC
terminal
Pin No. Signal name
1R
2G
3B
4 NC (not connected)
5NC
9NC
10
6
7
8
Ground
Ground
Ground
Ground
11 NC
12 NC
13 H-sync
14 V-sync
15 NC
Signal names for mini D-sub 15-pin
connector
263237HLC56_EN.book Page 15 Monday, June 5, 2006 3:46 PM