Filter
Top Products
8
HLC56 (E/F) Web 213:276
Chapter 1: Introduction
Front and side panel controls and connections
3
5
4
6
7
1
2
8
Monitor Side panel
Monitor front
Control panel
1 Red LED — Red light indicates power is on.
2 Remote sensor — Point the remote control toward the
remote sensor. See “Remote control effective range”
(- page 16).
3 POWER — Press to turn the monitor on and off.
4 VOLUME C c — When no menu is on-screen, these
buttons adjust the volume level. When a menu is on-
screen, these buttons function as left/right menu
navigation buttons.
5 MENU — Press to access the menu system
(- page 23).
6 INPUT (ENTER) — Repeatedly press to change the
source you are viewing (VIDEO-1/ColorStream HD-1,
VIDEO-2, ColorStream HD-2, HDMI, or PC.
When a menu is on-screen, the INPUT button on the
monitor control panel functions as the Enter button.
7 ARROWS BbC c — When a menu is on-screen, these
buttons function as up/down/left/right menu navigation
buttons.
8 VIDEO-2 IN — Standard (composite) video and standard
(analog) audio inputs plus optional S-video input for
connecting devices with either composite video or
S-video output.
Note:
• Standard (composite) video and S-video cables carry
only video information; separate audio cables are
required for a complete connection.
• Do not connect both a composite video and an S-video
cable to VIDEO-2 simultaneously or the picture
performance will be unacceptable.
263237HLC56_EN.book Page 8 Monday, June 5, 2006 3:46 PM