Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
24
32/36AFX61(E)
CHANNELVOLUMETV/VIDEOMENUDEMO
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To manually add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE.
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
SET UP
LANGUAGE
CLOCK
ANT
ADD ADD ERASE/ERASE/
TV
CH
PROGRAM
CABLE/CABLE
1 ANT1/2
SET
ENGL SHI
CORRECT ONI
T I LT
+
0
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.
Adjusting the tilt correction feature
When you install the TV or change the direction of the TV, the
picture may become tilted because of the earth’s magnetic field. If this
happens, make the following adjustment.
To adjust the tilt correction:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight TILT CORRECTION.
3. Press x or • to correct the picture tilt between +10 and –10.
SET UP
LANGUAGE
CLOCK
ANT
ADD ADDERASE/
TV
CH
PROGRAM
CABLE/CABLE
1ANT1/2
SET
ENGL SHI
CORRECT ON
T I LT
+
7
I
Changing channels
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button and then the
next two numbers. For example, to select channel 125, press
100–2–5.
MENU
yzx •
Channel yz
Channel
Numbers
MENU x •zy
Channel zy