Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
43
32/36AFX61(E)
Using the surround sound feature
The surround sound feature expands the audio listening field wider
and deeper to create exceptional sound quality from the TV’s
speakers. The feature uses stereo signals from a TV broadcast or
video input.
To turn on the surround sound feature:
1. Select the STEREO mode (see “Selecting stereo/SAP broadcasts”
on page 42).
2. Press MENU, and then press x or • until the THEATER menu
appears.
3. Press y or z to highlight SURROUND.
4. Press x or • to highlight MATRIX.
THEATER
SURROUND
MATRI X OFF/
To turn off the surround sound feature:
Highlight OFF in step 4 above.
In general, you can leave your TV in MATRIX mode because it will
automatically output the type of sound being broadcast (surround
stereo or monaural).
Adjusting the sound quality
You can change the quality of your TV’s sound by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight the item you want to adjust.
AUD OI
MTS
BASS
STEREO
50
50
0
TREBLE
BALANCE
RESET
3. Press x or • to adjust the level.
• x makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance
in the left channel, depending on the item selected.
Note:
When the MATRIX surround mode is
selected, the StableSound™ feature is
automatically turned off (see “Using the
StableSound feature” on page 46).
yzx •
MENU