Filter
Top Products
NOTICE
PREPARATION
INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION
33
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
5
Press the SHIFT button to make INTERVAL blink.
Press the + SET button to set the time interval be-
tween the individual recording fields.
6
Press the DISPLAY
button twice to erase the
display.
7
Press the REC button.
8
Input from the remote control switch.
Note:
One-shot input is not accepted during recording pause.
Each time pressing the + SET button, the display changes
as follows.
0.2s → 0.5s → 1.0s → 2.0s
Each time pressing the – SET button, the display changes
in the reverse order.
Time interval
1 field per 0.2 seconds
1 field per 0.5 seconds
1 field per 1.0 seconds
1 field per 2.0 seconds
Display
0.2s
0.5s
1.0s
2.0s
REC
Remote control switch
To release the One-shot Recording mode
Press the or TIME MODE button to change the time display on the VCR display to a display other than L01, L02 and L03.
1SHOT REC FIELD 1F
INTERVAL 0.2S
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
S E T U P
ALARM REC TIME 15S
MENU=[DISPLAY]
SPEED A 2H
17:30:02 L01
8/28/96 WED