Filter
Top Products
19
PLAYBACK
1
Press PLAY during playback.
A tape runs at double speed
playback.
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.
S
SLP
VCR
REC
L
TIMER
S
S L P
VCR
REC
L
TIMER
PLAYBACK
Playback
This section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
S
S L P
VCR
REC
L
TIMER
78
0
100
9
65
23
4
1
STOP
PLAY
FFREW
3
2
FF
CH/TRK
REW
Double Speed Playback
Basic Playback
1
Load a recorded cassette.
Power is turned on.
If the cassette has no safety tab, playback
starts automatically.
2
Press PLAY to start playback.
3
To stop playback, press STOP.
To resume normal playback
Press PLAY again
Rewinding / Fast-forwarding
Press REW or FF in the stop mode.
W-609/TSB DRAFT(19-23)01 26/11/99, 8:19 PM19