Filter
Top Products
29
RECORDING
Guide Channel Setting
1
Press PROG..
2
Select “PRESET” using FF or REW, and press ENTER.
3
Select “CH MEMORY” using PLAY or STOP, and press
ENTER.
4
Set “TV/CATV” to “TV” or “CATV” using FF or REW.
5
Press PROG. to return to the PRESET screen.
6
Select “GUIDE CH” using PLAY or
STOP, and press ENTER.
7
Enter channel numbers on the right of the guide channel
numbers.
Find a guide number you marked on the list using PLAY or STOP,
and enter the corresponding home channel number if necessary by
using number buttons.
Example: To enter home channel
number 7 (HBO) with guide channel
number 33 assigned.
In some areas, one channel may be
assigned more than one guide channel
number. In this case, enter the home
channel number to each of the guide
channel numbers.
8
Press PROG. three times to exit.
The set-up is all over and your VCRPlus+C system recording is
now available.
Example
Station
Your home channel number (on the channel line-up
chart supplied by cable companies)
Guide channel number
(on the TV Guide, local TV listings etc.)
Notes
• When your cable company
changes the channel line-
up, you must re-do this set-
up for the channel.
• The VCRPlus+C system
feature does not work on
programs from a connected
DSS
®
satellite receiver.
HBO 33 7
ESPN 34
AMC 35
(the case of CATV mode)
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• If you record cable channels, finish the cable box set-up (pages 32 – 35).
• Prepare the list like below.
3
®
3
®
E
n
D : PROG
SET UP
PRESET
PROGRAM
GUIDE CH HOME CH
GUIDE CH HOME CH
TO SET CH PUSH 0~9 KEYS
125 125
1 1
2 2
3 3
E
n
D : PROG
SET UP
PRESET
PROGRAM
GUIDE CH HOME CH
GUIDE CH HOME CH
TO SET CH PUSH 0~9 KEYS
30 30
31 31
32 32
33 7
78
0
100
9
65
23
4
1
STOP
PLAY
FFREW
7
1,5,8
2,3,6
4
W-609/TSB DRAFT(24-40)01 26/11/99, 8:20 PM29