Filter
Top Products
33
RECORDING
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Set “TV/CATV” on the CH MEMORY screen to “CATV” (page 16).
(Example)
(Continued)
Number
buttons
Cable Box Set-up
1
Press PROG. to display the MENU screen.
2
Select “PRESET” using FF or REW, and press ENTER.
3
Select “CABLE BOX/DSS” using PLAY or STOP, and press
ENTER.
4
Select “NO” or “C.BOX” using FF or REW according to your
connection type.
NO: • Type A
• Type C (A/B switch “A”)
• Cable channels will be selected using
CH/TRK on the remote control or
CHANNEL on the VCR.
→ Go to step 8.
C.BOX: • Type B
• Type C (A/B switch “B”)
• Type D
→ Go to step 5.
5
Select “OUTPUT CH” using PLAY or STOP, and enter either
of the following according to your connection.
Type B, C: the output channel number of
your cable box using number buttons.
(Usually 3 or 4. Check the rear of the
cable box.)
Type D: the line input mode “L1” using
I.SELECT.
6
Select “CONTROL” using PLAY or STOP, and set to “ON” or
“OFF” using FF or REW.
ON: if your cable box is remote-
controllable.
• Cable channels will be selected by CH
(CABLE BOX) on the remote control.
The VCR can change the cable
channel to the desired one when timer
recording or VCRPlus+C system
recording starts.
→ Go to step 7.
OFF: if your cable box is NON remote-
controllable.
• Cable channels will be selected by the
own channel selector of the cable box.
The VCR channel should be set to the
output channel of the cable box.
→ Go to step 8.
3
®
SET UP
PRESET
PROGRAM
USE no c. Box DSS
78
0
100
9
65
23
4
1
STOP
PLAY
FFREW
100
PLAY, STOP
POWER
(CABLE BOX)
CH
(CABLE BOX)
FF
ENTER
PROG.
REW
I.SELECT
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 2CH
COnTROL Off on
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 3CH
CO
n
TROL Off on
E
n
D : PROG
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 3CH
CO
n
TROL Off on
BRA
n
D TYPE no. 00
E
n
D : PROG
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 3CH
CO
n
TROL Off on
W-609/TSB DRAFT(24-40)01 26/11/99, 8:20 PM33