Triax DVB 63S DVR User Manual


 
32
OPERATION
Video text
If transmitted, the video text is displayed on your
tv. Use the remote control of your tv to operate
video text. In case of disturbances on your tv, like
e.g. interference of video text and picture, you
must set your receiver to CVBS-operation.
(Settings>Audio/Video, SCART mode).
EPG
When pressing “i” on your Remote Control, the
EPG appears on the screen. You will then get a
list of all the programs being transmitted at the
actual time. This list is called the NOW-list. By
pressing “>” and “<” on the RC you get this
cross-channel list showing the programs trans-
mitted at another time of the day. With “>” you go
forward in time, and with “<” you go backwards.
The EPG list contains programs from different
program providers. Exactly which of the providers
you want to be included in this list can be defined
in a separate menu.
Updating of EPG
The EPG is automatically updated twice a day, at
5 a.m. and 5 p.m. on these programs witch is
chosen in the EPG list. The display shows “EPLd”
when updating EPG.
Manuel updating of EPG can be done this way.
The receiver must be switch on , press the stand-
by-button , the display now shows “ - - - - “ for 3
sec. In this period you can press the “ i “ button
and the updating of EPG will start. To stop EPG
updating press the standby-button .
NOTE:
It can take about 2 min. before the receiver goes
in standby mode, dependent on how many EPG
data to be stored. Some provider only transmit
NOW and NEXT information’s. These programs
can only be included in the EPG by selecting the
program for more than 5 sec.
Survey
Besides the information concerning transmissions
from different program providers – but within the
very same time frame, you can get a complete