Triax DVB 63S DVR User Manual


 
9
receiver, and the receiver now transmits on the channel
shown.
If interference-free reception is still not possible on this
channel, you must repeat the procdure until a suitable chan-
nel is found.
When an optimum UHF-channel has been found, be sure to
store this on your tv.
In the menu Audio/Video further settings may now be
made, or you may return to normal mode by means of the
MENU-button. This setting is automatically stored when
you exit from the menu.
If your tv has automatic frequency search, you set your re-
ceiver to an arbitrary UHF-channel and start the automatic
frequency search of the tv. Repeat the procedure until you
find a suitable output channel and store this on your tv.
It might now be necessary to fine-tune the channel on the
tv-set.
VCR
f Connect the VCR to the SCART-socket VCR. On reproduc-
tion, the VCR delivers a switching signal to the receiver. This
automatically causes the VCR signal to be transmitted to
the tv.
Super VHS - VCR
If you have a Super VHS-VCR, you can record in Super-
VHS-quality from your DVB-receiver.
NB: This setting is effective for the SCART-sockets TV and VCR
on your receiver.
AUX IN/OUT
e Auxiliary connector for the connection of an analog receiver,
an extra tv or VCR (AV2).
Amplifier
Analog
To obtain the best possible sound quality you can connect the re-
ceiver to a HiFi-amplifier. To do so you must connect the Cinch-
sockets Audio R and Audio L on the receiver by means of a suit-
able cable to an input on your HiFi-amplifier (e.g. CD or AUX; NB:
The phono input is not suitable!).
Digital
If your amplifier has a corresponding electric input, you connect the
socket AUDIO OUT DIGITAL to the electric input of your amplifier.
The sampling rates 16, 22,05, 24, 32, 44,1 and 48 KHz are available.
SET-UP AND CONNECTIONS