1.5.4 Connect the receiver to a TV set
• Connect the receiver to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V,
TV out (UHF) or S/Video jacks.
1.5.5 Connect the receiver to a VCR
• Connect the SCART jack from the VCR to the back of the receiver.
• Satellite Receiver
• Video
• TV
1.5 Connecting and Installation
1.5.2 To Connect Satellite Antenna (DiSEqC 1.0)
• Connect the coaxial cable from the LNB to the LNB IN jack on back of the receiver.
1.5.1 How to connect the receiver to various other systems
There are several ways of connecting the receiver to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local
supplier for assistance in setting-up your system that is best suited to your requirements.
1.5.3 To Connect Motorized System (DiSEqC 1.2)
• Connect one end of your coaxial cable to the LNB IN
connector on the receiver and the other end to the
REC or Receiver connector on the DiSEqC 1.2 motor.
• Connect the coaxial cable from the LNB to the LNB
connector on the DiSEqC 1.2 motor.
• Connect the delivered LOOP cable of about
15 cm according to the picture.
• Connect the delivered LOOP cable
of about 15 cm according to the
picture.
• Satellite Receiver
• Satellite Receiver• Satellite Receiver
8