Filter
Top Products
AgGPS 252 Receiver User Guide 21
Installing the Receiver 3
• CB radio antennas
• cellular phone antennas
• machine accessory lights
3.3 Connecting to an External Device
After installing the receiver and connecting the appropriate cabling,
you can connect the receiver to various external devices. For example:
To convert the AgGPS 252 receiver to a Trimble 12-pin conxall cable,
use the adapter cable (P/N 50581).
Note – Do not bend the cable at the Deutsch connector. When you secure
the cable, use the supplied P-Clip. The P-Clip provides additional support
to the connectors and reduces the risk of damage.
To connect the AgGPS 252
receiver to ...
use the cable ...
an Autopilot system P/N 50165
(this cable has no DB9 connector)
a Field computer P/N 50166
a Yield monitor P/N 50166
a Trimble SiteNet™ radio, for RTK
positioning
P/N 49801
Plug the ... into ...
Deutsch 12-pin connector Port A on the back of the receiver
straight DB9-pin connector the external device
power connectors a power supply
Ag252_100B_UserGuide_ENG.book Page 21 Thursday, July 28, 2005 4:06 PM