Filter
Top Products
www.urcsupport.com/atlasocap
13
7. To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (e.g., VCR, DVD, AUD, or CBL)
for the device you are searching for.
3. Enter 9 9 1. The TV key will blink twice.
4. Aim the remote control at the TV and press
PWR once.
5. Press and release the CH+ key continuously,
then stop when the TV turns off.
NOTE: In the search mode, the remote control will
send IR codes from its library to the selected
device, starting with the most popular code
first.
6. Press PWR. The TV should turn on, then
press SETUP to lock in the code.
NOTE: If the TV does not turn on during step 6, then
slowly press and release CH- to go back
through the codes, then press SETUP when the
TV turns on.