Filter
Top Products
www.urcsupport.com/atlasocap
15
• Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
• Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
NOTE: Please have your original remote controls
handy before programming learning.
Programming a Learned Key
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
3. Then press the key on your Atlas OCAP
Remote Control that learns the new code.
4. Place the Atlas OCAP 5-Device Remote
Control with Learning head-to-head (about 2"
apart) from your original remote control. Also
locate the key (on your original remote
control) that you want the Atlas OCAP 5-
Device Remote Control with Learning to
learn.
5. On the original remote, press and hold the key
to be learned. The Atlas OCAP 5-Device
Remote Control with Learning’s LED will
blink rapidly, then turn off. Continue holding
1. Press and hold SETUP until the last-selected
mode key blinks twice, then press 9 7 5.
NOTE: If the LED displays one long flash instead,
either your batteries are low, or the Atlas
OCAP 5-Device Remote Control with Learn-
ing has a memory fault.
2. Press a mode key once (i.e., VCR, DVD, AUD,
TV, or CBL) to assign a mode for learning.
2"