Filter
Top Products
www.urcsupport.com/atlasocap
20
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6. To save the settings and exit the program:
Using the Master Power Key
You will see the devices turn on or off according to the
programmed sequence.
Clearing the Master Power Key
2. Enter 9 9 5. The last-selected device key
blinks twice.
3. Press PWR once.
4. For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once. For the second device
in the power sequence, press its key once (e.g,
TV). Then press PWR.
a. Press CBL once.
b. Press and hold SETUP until the CBL key blinks
twice.
1. After programming, point the remote control
at the devices. Press CBL once.
2.
Press
PWR
once to sequentially turn the
programmed home entertainment devices on
or off.
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2. Enter 9 9 5. The last-selected device key
blinks twice.
3. Press and release PWR.
Atlas OCAP M1056.fm Page 20 Wednesday, April 30, 2008 2:52 PM