Filter
Top Products
11
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
the URC-1047 Universal Remote Control after trying all of
the codes listed for your brand,or if your brand is not
listed at all,try searching for your code.
For example,to search for a code for your TV:
1. Turn on your TV.
2. On the remote control,press TV once.
Then press and hold SETUP until the
TV key blinks twice,then release SETUP.
3. Enter 9 - 9 - 1.The TV key will blink twice.
4. Aim the remote control at the TV and slowly
alternate between pressing POWER and TV.
Stop when the TV turns off.
NOTE:In the search mode,the remote control will
send IR codes from its library to the selected
device, starting with the most popular code first.
5. Press SETUP once to lock in the code.The TV
key will blink twice.
6. To search for the codes of your other devices,
repeat steps 1 through 5,but substitute the
appropriate key (i.e.,AUD or VCR) for the
(Audio or VCR) device you are searching for.
Time Warner Houston Manual 11/20/02 3:54 PM Page 11