Filter
Top Products
10
Volume Punch Through
This feature allows you to adjust the volume in a certain mode (e.g.
TV mode) while being in a different mode (e.g. VCR).
Last key pressed: You can control:
VCR TV volume up and down, mute
SAT TV volume up and down, mute
DVD TV volume up and down, mute
To punch through to TV volume while in VCR, SAT or DVD mode
press: SET(*) 9 9 3 TV key.
To punch through to AMP/TUN volume while in CD mode
press: SET(*) 9 9 3 AUD key.
To cancel the "Volume Punch Through"
press: SET(*) 9 9 3 Volume(+) (the red light will blink four
times).
(*) Hold down the SET key until the red light blinks twice (the red
light will blink once then twice).
Auto Scan
Your TOTAL CONTROL comes with a special Auto Scan function
which lets you “scan” through every programme available on your
device. For example, to scan the programmes on your TV:
1 Aim the TOTAL CONTROL at your TV. Press the TV key.
Press and release SET then press the MUTE key.
The TOTAL CONTROL will send the command to advance
through all the programmes available on your Television stop-
ping at each programme for about three seconds. Remember,
you must aim the TOTAL CONTROL at your device the enti-
re time you are using Auto Scan.
2 When you find a programme you would like to watch, simply
press any key on the TOTAL CONTROL key pad to stop the
Auto Scan feature.
- Auto Scan may not work with devices that did not have programme
(+/-) keys on the original remote control.