Filter
Top Products
SimpleSound™ Total System
Volume Control
SimpleSound is one of the most exciting features of
the AVEX R6. It gives you total volume control over
ALL the components in your system, even those that
do not have built--in volume control, such as TIVO,
DVD and VCR. SimpleSound saves you the hassle
and inconvenience of constantly switching between
component modes just to control volume.
First you should identify which device in your system
will be used to deliver sound. In a basic system, the
sound may come from your TV speaker. In a more
advanced system, the sound may come from your
audio components (such as a Surround Sound
Receiver or Home Theatre system).
Now, let’s set--up SimpleSound. Here’s how:
STEP 1: Press and hold the button that corre-
sponds to the Component you want to add volume
control to (such as a DVD or VCR) and the SELECT
(SEL) button at the same time for about three sec-
onds until the component LED light turns on.
IMPORTANT: You have 30 seconds to perform
the next step while you are in programming mode.
If you do not press a button within 30 seconds,
the component LED light will turn off. The remote
will exit the programming mode and you will have
to start over.
Page 21
COMPONENT
BUTTONS
SELECT