Venturer PLV76156 Flat Panel Television User Manual


  Open as PDF
of 16
 
E - 9
INSTALLATION
INSTALLING / REMOVING THE BASE STAND
WARNING:TheLCDDisplayisveryfragile,andmustbeprotectedatalltimeswhenremovingthe
basestand.Besurethatnohardorsharpobject,oranythingthatcouldscratchordamagetheLCD
display,comesintocontactwithit.DoNOTexertpressureonthefrontoftheunitatanytimebecause
thescreencouldcrack.
1.Disconnectallcablesorcordsconnectedtotheunit.
2.Laytheunitdownonaatsurfacewiththebackside
facingup.Pleasemakesuretoplaceasoftcushioned
material(suchasapilloworthickpieceoffoam)beneath
thescreen.
3.Toinstallthebasestand,placethebasestandonthe
mountingslot,pushthestandtillitlocks.
4.Toremovethebasestand,keeppressingthelockingarea
ofthebasestandandpulldownwardstoreleasethebase
stand.
MOUNTING THE TV UNIT
1) Markthecorrectmountingpositiononthewall.
2) Insertaxingscrew(s)atthemarkedpositiononthewall.
3) Aligntheslothole(s)ofthespeakeroverthescrewandpulltheTVdownwarduntilitisrmly
hooked.
NOTE
Removethebasestandbeforemountingtheunitonthewall.
Press and pull downwards
PLV76156S7_IB_UL_090727.indd 9 7/28/2009 09:41:10
 previous next