Venturer SHD7000 DVD Player User Manual


 
- 25 -
CUSTOMIZING THE FUNCTION SETTINGS
Downmixed PCM:
Select this when a 2ch digital stereo AV receiver or processor is connected to this player.
When you play a DVD recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is converted into
PCM (2ch) format to output.
Note:
Setting “Auto” or “PCM” will reduce output level of multi channel sound from the ANALOG AUDIO
OUTPUT jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:
- view the playback picture on an HDMI TV connected to this player.
- play an HD DVD of a certain type, recorded in linear PCM format.
In this case, the output level will be restored by setting to “Downmixed PCM”.
Digital Out HDMI
To select the output sound format when connecting the HDMI OUTPUT jack.
1. In STOP mode, press the SETUP button on the remote control.
2. Use the or button to select Audio, then press the OK button.
3. Use the or button to select Digital Out HDMI, then press the OK button.
4. Use the or button to select the options (Auto, PCM or Downmixed PCM), then press the OK button.
5. Press the SETUP button to exit menu.
Auto:
Select this when an HDMI device equipped with built-in Dolby Digital, DTS, MPEG or a linear PCM
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD or DTS-HD, PCM is output (core
only for DTS-HD). When you play a disc recorded in Dolby Digital or DTS-HD format, digital audio signal
(bitstream audio) is output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG,
sound is converted into linear PCM to output.
PCM:
Select this when an HDMI device that has multi channel input is connected to this player.
When you play an HD DVD or DVD recorded in multi channel in Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD format, the sound is decoded and output in multi channel in linear PCM format.
Digital Out SPDIF PCM
Digital Out HDMI Auto
Dynamic Range Control
Dialog Enhancement Off
Auto
Digital Out HDMI
Auto
PCM
Downmixed PCM
Picture
Audio
Language
Ethernet
General
SETUP MENU
Bitstream:
Select this when an AV receiver or processor equipped with built-in Dolby Digital, DTS or MPEG
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is output.
When you play a disc recorded in DTS-HD format, the sound is converted to a DTS bitstream. If the AV
receiver or processor does not support DTS, select “PCM”.
PCM:
Select this when a 2ch digital stereo amplifier is connected to this player.
When you play an HD DVD or DVD recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS-HD
format, sound is converted into PCM (2ch) format.