Filter
Top Products
Operation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 39
PRE
L
IMINAR
Y
Select Color from the Picture Adjust menu. While looking at the color bar pattern through a
blue filter, adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image appears
greener. To set the tint, select Tint from the Picture Adjust menu. While looking at the color
bar pattern through a blue filter, adjust the tint level until the cyan and magenta color bars
(on either side of the green bar) appear to be a single shade of blue.
1. Like the brightness and contrast controls, the color and tint controls
are interactive. A change to one may require a subtle change to the
other in order to achieve the optimum setting.
2. Color and tint controls are not available on the HDMI or RGB-HD
inputs.
gray
yellow
cyan
green
magenta
red
blue
Note