Filter
Top Products
Operation
24 Vidikron VL-37 Owner’s Operating Manual
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Adjust the resolution to 1024x768 pixels.
5. Click the Advanced button and click the
Monitor tab on the dialog box. Set the
vertical frequency to 60Hz and click OK.
4.4
Using the On-Screen
Menus
To use the on-screen menus:
1. Press MENU to display the Main Menu.
2. To select a menu item, use the up- or down-arrow buttons ( , ) on the remote
control to highlight it.
3. Press ENTER or the right-arrow button ( ) to access that menu.
4. Use the up- or down-arrow buttons ( , ) to select the setting you want to change.
Then, press ENTER or the right-arrow button ( ).
5. Press the right- or left-arrow button ( , ) to change that setting.
6. To return to the previous menu, press MENU.
The DView OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on the
selected input source, some menu options may not be available.
1. The maximum available resolution and vertical frequency is 1024 x768
at 75Hz or the maximum supported by your video card, whichever is
lower. You can get the best picture at 1024 x768 @ 60Hz.
2. The DView supports 24-bit color (16,777,216 possible colors).
Note