Filter
Top Products
Operation
Vidikron PlasmaView VHD Installation/Operation Manual 35
PRE
L
IMINAR
Y
4.3
Using the VHD Controller
Menus
Press the MENU button on either the remote control or the VHD Controller front panel to
display the Main Menu. To select a menu item, use the UP (
) and DOWN ( ) buttons on
either the remote control or the VHD Controller front panel to highlight it. Press ENTER to
confirm your selection.
The PlasmaView VHD OSD menus are arranged hierarchically, as shown in Figure 4-1.
Depending on the selected input source and signal characteristics, some menu options may
not be available.
When the input signal resolution is 1080i analog (via the HD1 or HD2
input) or lower, the menus appear both on-screen and on the front-panel
display of the VHD Controller as you navigate them:
When the input signal resolution is 1080i digital or 1080p (via the HDMI1
or HDMI2 input), the menus appear on the front-panel display only.
Note
Input Source
Aspect Ratio
↑
↓