Filter
Top Products
Installation
Vidikron PlasmaView VHD Installation/Operation Manual 17
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PlasmaView VHD installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1
Mount the PlasmaView VHD on a wall or table stand 18
2
Connect the VHD Controller to the PlasmaView VHD 22
3
Connect signal sources to the VHD Controller 24
4
Connect external controller to VHD Controller RS-232 port
(optional)
28
5
Apply power to the PlasmaView VHD 33
6
If using the PlasmaView VHD with a computer, adjust
computer display properties
33
7
Display calibration: adjust the following for analog inputs;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
37
8
Repeat Step 7 for digital inputs 47
Note