Filter
Top Products
ViewSonic CD4225 21
Basic Operation
Power ON and OFF Modes
The main power of the LCD monitor can be turned on or off using the main power switch on the terminal
panel. With the main power of the LCD monitor turned on, you can toggle between the on and standby
modes using the following two options:
Power Indicator
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power
consumption of the monitor when the keyboard or the mouse has not been used for a fixed period.
The power management feature on your new monitor has been set to the ”ON” mode. This allows your
monitor to enter a Power Saving Mode when no signal is applied. This could potentially increase the life
and decrease the power consumption of the monitor.
1. Pressing the Power button.
NOTE:
Before pressing the power button, be
sure to connect the supplied power cord
to the LCD monitor.
2. Using the remote control.
NOTE:
Before operating the remote control, be
sure to connect the supplied power cord
to the LCD monitor.
Status Color
Power ON Green
Power OFF Red
Power Standby Orange
Failure detected Flashing red