Memorizing the Channels (continued)
DTV Signal Strength
You can make use of DTV signal strength bar to check how strong
your DTV signal is and whether you need to adjust your antenna or
digital cable input. The stronger the signal strength, the less likely you
are to experience picture degradation.
Channel Label Setup
Navigate to the CHANNEL SETUP menu and highlight Channel
Label.
1
2
Press OK to enter into channel label editing mode.
se / to move the se / to
Press MENU to exit the editing mode.
U 3 4 cursor, u 5 6 select character.
If required, you can give a name to the programs. (Only for analog channels)
3
Press EXIT button to return to TV viewing.
Navigate to the CHANNEL SETUP menu, at the bottom of the menu
screen the Signal Strength bar is displayed indicating the level and
quality of signal that is received by the unit for the current DTV
channel.
Favorite Channel Setup
Navigate to the CHANNEL SETUP menu.
1
2
You can create a favorite channel list into memory as follows:
3
Highlight Current Channel item, use 3or4to select your favorite
channel.
Highlight Favorite Channel item, use 3or4to select ON.
4
Repeat the above steps to set more favorite channels (up to 10
channels)
5
Now a favorite channel list is created, and you can make use of it
to quickly select your favorite channel.
Press FAVORITE button to call up the Favorite channel list, use
5 6to highlight the channel, use OK to select that channel. /
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
> > >
> > >
OFF
OFF
WGBH-
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
> > >
> > >
OFF
OFF
ABCD-
CHANNEL SETUP
TV Source
Current Channel
Channel Label
Channel Skip
Favorite Channel
Auto Search
Input Select
Signal Strength
AIR
2-1
> > >
> > >
OFF
ON
WGBH-
Note: the names of digital broadcasting channels are automatically
assigned and thus cannot be assigned by users.
ViewSonic N4280p
18