Filter
Top Products
Remote Control
PGM+/-
Press + or - buttons to scroll
through the channels (or
MENU ▲ /▼ button).
VOL+/-
Press + or – to increase or
decrease the volume (or
MENU
button).
MENU
Press this key to display o
r
exit main menu.
MUTE
Temporarily interrupt the
sound or restore it.
NICAM
To select Mono/
Stereo/Dual from TV RF
input.
POP, SWAP, Position,GUIDE
is not available on this model.
ViewSonic 9 NX1940w/NX2240w
POWER:
Press to turn on/off the TV.
The TV is never completely
powered off unless it is
physically unplugged.
SOURCE
Press to select input signal
source.
0~9 DIGIT buttons and -/100
Press to enter channel
numbers.
RECALL
To display the previously
selected TV channel.
TV/DTV
DTV is not available this mode.
Press to select TV mode.
SCART
Press to select SCART mode.
HDMI/PC
Press to toggle between PC and
HDMI source modes.
AV/COMP
Press to toggle between AV,
S-VIDEO and YPbPr source
modes.
DISPLAY
Press this key to display:
(1) the channel number when
watching a TV programme.
(2) the input source when
watching the other video
programme.
WIDE
Press to change size mode,
Size is not available on PC and
HDMI mode.
ENGLISH