Filter
Top Products
When the input source is in PC mode, you can select Brightness, Contrast, Position,
Video noise, Sharpness, Auto Adjust, Info, Colour Temp., Red, Green, Blue and Reset to
default.
1. Brightness and Contrast: The range can be adjusted from 0~100.
2. Position: There are two options, Horizontal and Vertical, which can be adjusted from
-50 to +50.
3. Video noise: There are two options, Phase and Clock, which can be adjusted from -50
to +50.
4. Sharpness: Select from five options of Softest, Soft, Auto, Sharp and Sharpest. You
may adjust the above options according to your preference.
5. Auto Adjust: Automatically adjust PC input to the optimal screen size.
6. Information: Prompt the current size for PC input definition (only the definition that can
be shown by this device).
7. Colour Temp.: There are four options of colour temperature provided for users -
normal, warm, cold and User. You can select the three colour temperatures of normal,
warm, and cold, or manually adjust red, green or blue in the User setting (you can only
adjust red, green and blue in the user setting).
8. Reset to default: It is used to reset the picture settings to the factory default mode.
Function Setup
When the input source is in TV mode, you can select Source OSD, Language, Country,
ACI, Timers, TT Language, Teletext E/W and Reset to default; shown in the figure below:
1. Current Source OSD setting: When OSD is set to ON, the left upper corner of the
display will show the input source or the TV channel number; when OSD is set to OFF,
the input source or the TV channel number will disappear.
2. OSD language setting: There are ten languages option provided - English, French,
German, Spanish, Russian, Italian, Finnish, Swedish, Danish, Norwegian.
ViewSonic 18 NX1940w/NX2240w
ENGLISH