Filter
Top Products
ViewSonic PJ751
9
Power Connection
If the power cord is not compatible with the local AC outlet standard, contact your local dealer or
ViewSonic Corp to obtain the correct power cord..
Connect the AC inlet of the projector firmly to the power outlet with the power cord.
CAUTION
• Be alert when handling the power cord. Do not
bend the cord at a sharp angle or lay it under sharp
heavy objects that could cut the insulation.
• Plug the power connector securely to an AC wall
outlet.
Connecting Your Devices
NOTE: When connecting the projector to a notebook computer, set it so as to activate the RGB
external image output (setting it to CRT display or to simultaneous LCD and CRT display). For more
information, refer to the instruction manual of the notebook computer.
Plug & Play
This projector is compatible with VESA DDC 1/2B. Plug & Play is possible by connecting to a com-
puter that is compatible with VESA DDC (Display Data Channel).
Use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B com-
patible). Plug & Play may not operate by any other connection.
NOTE:
• Plug & Play is a system configured with peripheral equipment which includes a computer, display
and an operating system.
• This projector is recognized as a Plug & Play monitor. Load the driver contained in the CD Wiz-
ard included with the unit.
Power
outlet
AC inlet
Power cord
DVD Player
Display
Monitor
S-Video Tape
Recorder
Computer
(notebook)
Speaker with
amplifier
Computer (desktop)