Filter
Top Products
16
ViewSonic PJ751
Adjusting the Image Position
1 Press the POSITION button
As illustrated on the right, a dialog box will appear on the screen to aid
you in adjusting the position.
2 Use the , , , buttons to adjust the position
When you want to initialize the position, press the RESET button dur-
ing adjustment.
Press the POSITION button again to close the dialog box and com-
plete this operation. (If no activity is detected, the dialog will automat-
ically disappear after a few seconds.)
This function is only available for RGB IN 1/2 input.
Control Panel