Filter
Top Products
8 ViewSonic VPW450HD
Connecting a VCR
Using S-Video Input
1. Connect the S-Video (4-pin DIN) connector from
the VCR to the “S-VIDEO” input on the back of
display.
2. Connect the red (R) and white (L) audio jacks
from the VCR to the R and L audio-in jacks
located next to the S-VIDEO connector.
Using Composite Input
1. Connect the “yellow” (video) out connector from
the VCR to the yellow “VIDEO 1” input on the
back of display.
2. Connect the red (R) and white (L) audio-out
jacks from the VCR to the R and L audio-in jacks
located next to the yellow “VIDEO 1” connector.
External Audio Connections
Connecting External Amplified Speakers
1. This display can be connected to an external set of amplified
speakers using the AUDIO OUT jacks located on the back of
the display. In addition, this display is equipped with a small
3.5mm phono style plug for remote turn-on applications that
will automatically send a remote turn-on/off signal to the
external amplified speakers.
2. Connect the red (R) and white (L) AUDIO OUT jacks from
right side of the connector panel to the external amplified
speaker.
3. As an option, you may use the remote turn-on plug. Please
note that not all external amplified speakers can accept
remote-turn on signals.
Connecting to an External Amplifier
1. This display can be connected to an external amplifier using
the AUDIO OUT jacks located on the back of the display. In
addition, this display is equipped with a small 3.5mm phono
style plug for remote turn-on applications that will automati-
cally send a remote turn-on/off signal to the external ampli-
fier.
2. Connect the red (R) and white (L) AUDIO OUT jacks from
right side of the connector panel to the external amplifier or
receiver.
3. As an option, you may use the remote turn-on plug. Please
note that not all external amplifiers can accept remote-turn on
signals.
Using the Subwoofer Out (Connecting a Subwoofer)
1. This display is equipped with a subwoofer output for con-
necting to an external amplified subwoofer.
2. Connect a RCA cable from the subwoofer output jack to
the external subwoofer.
Note:
The AUDIO OUT RCA jacks can be set to
either Fixed or Variable audio output lev-
els. Please see page 19 for additional
explanation of this feature.
The RCA subwoofer outputs frequencies
below 120Hz. The subwoofer will use the
same Fixed or Variable audio output set-
ting as AUDIO OUT RCA jacks.
The 3.5mm phono/earphone output level is
always used for remote turn on/off applica-
tions.