Filter
Top Products
ViewSonic VPW450HD 17
Widescreen Viewing Modes (Con’t)
Accessing Widescreen Viewing Modes using OSD
You can also use the OSD menu to access the same wide-
screen and zoom mode functions. To access these modes
using OSD:
1. Press the MENU +/- keys on the remote or the front
control panel.
2. Make sure that the following “Picture” OSD menu is
displayed.
3. Use the MENU +/- keys to navigate to SCREEN
WIDTH and use the ADJ +/- keys to switch between
4:3, 16:9 or PANORAMA.
4. Use the MENU +/- keys to navigate to ZOOM and use
the ADJ +/- keys to switch between zoom 1,2 or 3.
Please note that this function is not accessible unless
the SCREEN WIDTH is set to “16:9”.
On-Screen Display (OSD) Settings
Accessing OSD Settings Menu
You can set various OSD display settings from the OSD menu.
1. Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “OTHER” OSD sub-menu as displayed below.
OSD Timeout
Turns on OSD timer when set to ON. When set to ON, the OSD will
automatically disappear from the display if no key action is detected
for the set number of seconds. If set to OFF, then OSD will remain
on the screen.
OSD Time Setting
Sets the number of seconds the OSD will remain active on the
display before turning itself off. OSD TIMEOUT must be set to ON
for this setting to function.
OSD Brightness
Sets the brightness level of OSD screen between 1 and 10.
OSD Background
You can set the OSD menu’s background to transparent or with a
blue background. Set to OFF if you want a transparent setting. Set
to ON if you want a blue background.
Note: To prevent permanent after-image, we strongly suggest to turn
“OSD TIMEOUT” to ON.