Filter
Top Products
ViewSonic VPW450HD 33
TV Tuner Settings
Accessing the TV Settings Menu
If your display is equipped with the optional tuner module, available TV tuner settings can be displayed by:
1. Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “TV” OSD sub-menu as displayed below.
3. Use the MENU +/- keys to select the option you would like to set. A description of each option is
described in this section.
4. Use the ADJ +/- keys to change actual settings.
MTS
Sets stereo reception settings for the TV tuner. This function is also
accessible using the remote control’s MTS key. Pressing the MTS
key will cycle the tuner through all three settings.
STEREO
Set status to STEREO to receive stereo reception from TV broad-
casts when available. Not all TV broadcasts are transmitted with
stereo sound capability.
MONO
Set status to MONO to set audio to mono mode.
SAP
Set status to SAP (Second Audio Program) to receive audio simul-
casts in other languages. Not all TV broadcasts are transmitted
with second audio program.
CCD
Sets Closed Captioning function. Go through the following settings.
Note: Only CC1 mode is enabled for U.S. models.
CHANNEL SEARCH
Channel search will automatically search for TV channels with a
broadcast signal. Channel search will skip over channels that do not
have a reception so you don’t have to watch them as you change
through channels. By default, channel search will always be set to
DISABLE. To engage channel search, simply set to ENABLE.
TUNER SOURCE
The TV tuner is compatible with Cable TV or standard reception
using an antenna. If you are using Cable TV, set the TUNER
SOURCE setting to CABLE. If you are using an antenna, set the
setting to AIR.
BACKGROUND / BACKGROUND COLOR
Background setting eliminates the “snowflake” effect that results
when a TV channel is not available by displaying a colored
background. The BACKGROUND COLOR setting allows you to
choose the color preference.
Quick View
Using Quick View on Remote Control
Quick View allows you to quickly switch between the channel currently
watched and the channel previously watched. Simply press the Quick
View key on the remote control to switch. Repeated pressing of the
Quick View key will switch the channels back and forth between the two.