Filter
Top Products
ENGLISH
14
ViewSonic VT2205LED/VT2405LED
Before you can use your TV to view TV programs, you need to let it search for and tune
TV station programs appropriate to your region. This process only needs to be done when
the TV is newly installed, or whenever you install it in OSD menu for convenience of
operation.
1. When Backlight is highlighted, use the ◄ or ► buttons to adjust the backlight.
2. Press ▼ button to select Language, use the ◄ or ► buttons to select the language
displayed on the menu.
3. Press ▼ button to select Auto Tuning and press the OK button.
4. Press ◄ or ► to select the Country where you operate the TV, then select Start and
press OK. The Auto Tuning automatically creates a list of receivable channels. Press
the BACK button at any time to interrupt the memorization process. (The list cannot be
created if interrupted)
10. Initialize your TV
Press Power button on the remote control. the TV will turn on and the power indicator
will light up blue. When rst turned on (and until tuned), the Initial Menu will display:
11. View the TV programs
• Press PROG▲ or PROG▼ on the remote control to sequentially cycle through
your TV channels.
• To select a single- or double-digit channel, press the corresponding channel selection
buttons on the remote control. For example, to select channel 8, press 0 and 8 on the
remote control.
• Press VOL on the remote control to increase volume. The volume indicator will
increase in length as volume rises.
• Press MUTE on the remote control to turn off the sound temporarily.
Press MUTE once more, or press VOL or VOL to restore the sound level.
• You can press RETURN on the remote control to quickly return to the previous
viewed channel.