Filter
Top Products
ENGLISH
31
ViewSonic VT2205LED/VT2405LED
Connecting the PC input
1. Connect the VGA output of your PC to the VGA IN terminal on the TV using a mini D-Sub
(15-pin) cable (not provided).
2. Connect the audio output of your PC to the TV's AUDIO INPUT terminal using an
appropriate 3.5mm-diameter Mini-jack stereo audio cable (not provided).
To view video image from this input, press INPUT and use ▲▼ button to select VGA
then press OK button.
When you connect the display to a PC, you should adjust the resolution in the display properties
of the computer to closely match the native resolution of the display (for example, 1680 x 1050
pixels). See "Supported PC (D-Sub/DVI) input signal resolutions" on page 55 on other supported
resolutions.
PC
Audio cable
Mini D-Sub cable
Connecting the S-Video input
1. Connect the S-Video output jack on your output equipment to the S-VIDEO jack on your
display using an S-Video cable (not provided). Pay attention to the pins in the plugs
when inserting so to keep the pins from bending.
2. Connect the S-Video audio output jack of the output equipment to the AUDIO L/R input
jacks using a suitable audio cable (or a composite video cable. In this case, the yellow
plug will not be used).
To view video image from these inputs, press INPUT and use ▲▼ button to select
S-Video then press OK button.
You should not connect both a composite Video and an S-Video from the same device; just one
or the other. If you have the choice, use the S-Video instead of composite Video as an S-video
signal provides a higher quality signal to that of composite Video.
DVD Player
Audio cable
S-Video cable