EN-11
. English .
User’s Manual
Projector
Setting Up the Projector
1.Place the projector on a sturdy, level surface within five feet of the computer or video
source.
Caution:
Do not hold the projector by the lens. This can damage the lens.
2.Place the projector the correct distance from the screen. The distance between the
projector and the screen determines the actual image size. Use the general
guidelines below to determine the correct distance.
1 Meter 2 Meters 2.5 Meters 4 Meters 5 Meters 8 Meters 10 Meters
WIDE 34.3” 68.8” 83.8” 137.2” 167.6” 274.4” 331.4”
TELE 25.9” 51.8” 63.5” 103.6” 125.6” 207.2” 251.2”
3.When replacing batteries on the Remote Controller, take the following precautions:
Do not recharge batteries or expose batteries to fire or water.
Replace batteries as soon as they run down. If the batteries leak, wipe away the
fluid with a soft cloth. If battery fluid gets on your hands, wash them immediately.
Remove the batteries if you will not be using the remote controller for a long
period of time.
Distance between the
screen and the center of the lens
Projector
Distance
Projection
Size(Diagonal)