Filter
Top Products
EN-26
User’s Manual
Projector
4.Press the
or
button to select the sub-menu item.
5.Press the
or
button to adjust the
value of desired sub-menu item.
On the Projection and Auto Off
sub-menus, press the
or
button
to select the desired setting.
On the Lamp Life sub-menu, the
lamp’s lifetime counter is calculated by
the projector system.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the
or
button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Option Description
OSD Timeout Duration OSD menu stays active (at idle state).
OSD PosiH Adjusts OSD menu display position
(horizontally - left & right) on the screen.
OSD PosiV Adjusts OSD menu display position (vertically - up
& down) on the screen.
Projection Sets the projection display.
Front The image is projected directly on the screen.
Rear The image is reversed horizontally.
Ceiling The image is inverted vertically.
Auto Off Automatically turns off the lamp if the projector does
not detect an input signal for specified time period
(30 minutes).
On Auto Off is active.
Off Auto Off is inactive.
Lamp Life Displays lamp’s lifetime counter (by hour).