Filter
Top Products
EN-16
User’s Manual
Projector
Operational Indicator (LED)
There are two LEDs on the top of the projector, the Power LED and the Lamp LED.
They provide valuable information about the projector.
LED TYPE COLOR STATUS MEANING
Power LED Green Solid The projector is powered and ready.
Power LED Red Solid The projector system has some problems with its fan, so
the projector cannot start up.
Lamp LED Green Solid The lamp is in good condition and is projecting at
maximum brightness.
Lamp LED Red Solid The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate until
it fails. Change the lamp and reset the lamp time
counter.
Lamp LED Amber Flashing The projector is shutting down. The fan motor is
cooling the lamp for shutdown. Do not unplug the
power cable or turn the power switch off before the
Lamp LED turns off. The fan motor will turn off when
the lamp has cooled.
PROJECTOR CONTROL MENUS
This section describes how to make various adjustments and settings using the menus.
Changing a Menu Setting
The projector menus can be accessed using either the Projector Control Panel or the
Remote Controller.
1.Changing the menu display:
Press the MENU button either on the Remote Controller or the Projector Control
Panel.
Each press of the MENU button switches the display format as follows: