Filter
Top Products
20
Connecting Coaxial (RF)
Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital
cable to the DTV/TV CABLE/ANTENNA connector at the rear
of the LCD HDTV.
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote
or side of the LCD HDTV, or directly by pressing
the TV button on the Remote Control.
Note:
• Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult
your cable, satellite or TV station operator.
• Digital broadcasts are not available in all areas. Refer to www.antennaweb.org
for detailed
information.
• Make sure the antenna and coaxial cable are correctly grounded.
Using Your Antenna or Cable for TV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your
antenna or cable to the DTV/TV
CABLE/ANTENNA connector at the rear of the
LCD HDTV
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote or side of the LCD
HDTV, or directly by pressing the TV button on the Remote Control.
Using the Antenna or Cable through your VCR
1. Turn off the power to the LCD HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out”
connector on the rear of your VCR to the DTV/TV
CABLE/ANTENNA connector at the rear of the
LCD HDTV.
3. Turn on the power to the LCD HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of the LCD HDTV, or directly by
pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the
rear of your VCR.