Vizio E321VA Flat Panel Television User Manual


 
VIZIO 60HZ E SERIES User Manual
7
Version 3/16/2010 www.VIZIO.com
Chapter 1 Setting Up Your HDTV
Read this user manual carefully before installing your HDTV.
For the power consumption of your HDTV, please check the specification sheet for your model in
Chapter 6. When an extension cord is required, use one with the correct power rating. The cord
must be grounded and the grounding feature must not be compromised.
Install your HDTV on a flat surface to avoid tipping.
For proper ventilation, you must allow a 1” space between the back of your HDTV and the wall.
Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
If you want to mount your HDTV on the wall, see below for additional information.
Read this user manual carefully before installing your HDTV.
VIZIO offers professional installation. Contact VIZIO for more information on these services at 877-
MYVIZIO (877-698-4946) or www.VIZIO.com.
Attaching the TV Stand
Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
To unpack the TV and stand base:
1. Remove the remote control, batteries, and power cord
from the foam end caps.
2. Remove the two top foam end caps.
3. Remove the stand base under foam end cap.
4. Remove the TV from the box and lay it
face down on a clean, flat surface.
Note: Make sure that the surface is free of
debris to prevent the TV screen from getting
scratched.
To attach the TV stand
base:
1. Line up the stand
neck (attached to the
TV) with the stand
base.
2. Push the stand base onto the stand
neck.
3. On the bottom of the base, insert the
included (Qty. 4) thumbscrews and
tighten it.
4. Move the TV into an upright position.
Caution: Do not apply pressure to the screen or throw objects at your HDTV. This may
compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse
or improper installations.