Filter
Top Products
VIZIO E420VL / E470VL / E550VL User Manual
E420VL Remote Control Buttons
POWER ( _ )--Press to turn the TV on from the Standby mode. Press it
again to return to the Standby mode.
CEC-Supported Buttons:
CEC needs to be set up and enabled for these buttons to work. See CEC on
page 44 for more information.
• (Record)--Press to begin recording on your CEC-supported device.
II (Pause)--Press to pause playback on your CEC-supported device.
• (Play)--Press to start Playback on your CEC-supported device.
• (Stop)--Press to stop playback/recording on your CEC-supported
device.
14_(Previous)--Press to skip the previous track on your CEC-
supported device.
(Reverse)--Press to reverses playback on your CEC-supported
device.
_,_(Fast Forward)--Press to fast forward playback on your CEC-
supported device.
I_i_1(Next)--Press to skip to the next chapter on your CEC-supported
device.
EXIT--Press to exit from open menus.
MENU--Press to open the On-Screen Display (OSD) menu.
OK--Press this button to display the Channel List. Press to confirm
selections for On-Screen Display (OSD) menus.
Silver Diamond (represented by • • _1 • in the manual instructions)-
Pressing up, down, left, or right on the points of the diamond are used to
navigate the OSD menu. They will also be used as value settings when the
slide bar is shown on the screen and option settings to turn a feature off or on.
BACK--Press to return to a previous OSD menu.
GUlDEmPress to display detailed program information when viewing a digital
TV program.
Color Buttons (Yellow, Blue, Red, & Green)mThese buttons currently
do not operate any functions on your HDTV.
VOL +/- --Press to turn the volume up or down.
MEDIA - Use this button to access the USB drive to view your pictures.
MUTE--Press to turn the sound on and off.
LAST-- Press to recall the previously viewed channel.
CH +/---Press to change the channels up or down
HDMI--Press to select the HDMI input. Press repeatedly to cycle
between both HDMI inputs.
AV--Press to select the AV input.
TV--Press to select the TV input.
Number Button Pad--Press to select a channel or enter a password.
INPUT--Press to cycle through the various devices connected to your
TV (called Inputs). The inputs cycle in the following sequence: TV, AV,
Comp, HDMI-1, HDMI-2, HDMI SIDE, RGB, and Media. After you have
stepped through the entire sequence, you will return to the beginning.
- (DASH)--Press to insert a dash between the main and sub-channels.
For example, channel 28-2 would be selected by the button sequence 2, 8, DASH, 2.
Version 2/12/2010 17
www.VlZlO.com