Vizio E420VL Flat Panel Television User Manual


 
VIZIOE420VL/ E470VL / E550VL User Manual
Connecting a Home Theater System
Using RCA
1
1
,
2.
,
4.
,
6.
7.
Notes:
Turn off the power to the HDTV and Receiver/Amp.
Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the AUDIO OUT audio connectors on the
back of the HDTV.
Turn on the power to the HDTV and Receiver/Amp.
Press the MENU button on the remote control to open the On-
Screen Display (OSD) menu.
Press on the remote control to highlight the Audio menu, and
then press OK to select.
Press on the remote control to select TV SPEAKERS.
Press on the remote control to select OFF so the sound from
the HDTV will be routed through your Receiver/Amp system.
Refer to your Receiver/Amp user manual to select the corresponding
audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
Using Optical (S/PDIF)
SPDIF
(OPTICAL)
1
If your sound system has a S/PDIF (optical) digital audio input you can connect it from your sound system
to the OPTICAL digital audio out on your HDTV. This is active when receiving audio with the programs
being viewed no matter what input is being used.
1. Connect one end of the optical cable to optical connectors on the home theater and the other end
to the OPTICAL jack on your HDTV.
2. Turn on the power to your HDTV and home theater.
3. Change the input on your home theater to optical. See your home theater user manual for more
information.
28
www.VlZlO.com