VIZIOE420VL/ E470VL / E550VL User Manual
The display image does not
cover the entire screen.
You can see a picture but you
cannot hear sound.
The TV has pixels (dots) that
are always dark or colored.
You see "noise" or "trash" on
the screen.
• If you are in RGB mode (Computer), make sure that H-Size and V-Position in the
On Screen Display (OSD) are set correctly.
• If you are using TV, AVl, AV2 or Component with 480i input, press the WIDE
button on the remote control to scroll through various screen modes.
• Press Volume + (Up) on the remote control.
• Press MUTE on the remote control to make sure that MUTE is not ON.
• Check your audio settings. The audio may be set to SAP, or the speakers are set
to off.
• Check the audio connections of external devices that may be connected to the
HDTV.
Your HDTV is manufactured using an extremely high level of precision technology,
however, sometimes some pixels of your HDTV may not display. Pixel defects
within industry specifications are inherent to this type of product and do not
constitute a defective product.
When your HDTV's digital capabilities exceed a digital broadcast signal, the signal
is up-converted (increased) to match your TV's display capabilities. Up-converting
can cause noise or trash.
If you are using an antenna, the signal strength of the channel may be low. Make
sure your antenna is connected securely to the TV and move the antenna around
the room or close to a window.
You switch to a different input • The TV remembers the volume level from the last time you adjusted it. Ifthe
and the volume changes, sound level is higher or lower from another source, then the volume wilt change.
You switch to a different input • The TV remembers the viewing mode from the last time you used a particular input
and the screen size changes. (AV-1, AV-2, Component, HDMI and TV).
Tips for High-Definition Users.
Tips for Letterbox Content
Users.
• Your HDTV is an ideal platform for viewing High Definition Content.
• Best image quality wilt be achieved by HDMI. The next best is Component,
followed by Composite.
• Due to variances in broadcast practices, it is possible some image distortions can
OCCUr.
Some Letterboxed (or "Widescreen") versions of DVD movies are formatted for
standard 4:3 Televisions. Your HDTV has the ability to expand this content so the
entire screen is filled at the expense of image accuracy. To use this function, press
ZOOM on the remote control to cycle among the options.
USB device is not recognized.
Image or sound is interrupted
or distorted.
Slideshow doesn't start. •
• Make sure the device is correctly inserted.
• Make sure the device is FAT or FAT32
• Make sure it contains the supported files.
• Make sure the device is correctly inserted.
• Make sure that the file complies with the supported format, bit rate and/or profile.
Also check the file for damage.
• Some files that comply with the supported format may not play back or display
properly.
Make sure the viewer isn't in pause, rotation, or zoom mode.
64
www.VlZlO.com